BuildForce Canada projects the construction industry could be short by as many as 34,300 workers by 2034, even after counting on hundreds of thousands of new entrants to replace an aging workforce. Against a gap that size, an hour a licensed tradesperson spends on invoicing or scheduling instead of billable, license-required work is an hour the industry can’t really afford to waste. construction staffing support in Canada often starts exactly here, moving the paperwork off a tradesperson’s plate rather than trying to hire around a shortage that isn’t going away soon.
Key Takeaways
- BuildForce Canada projects the industry will need to recruit roughly 306,200 workers by 2034, with a possible shortfall of up to 34,300 workers even after new entrants are counted.
- In the residential sector alone, about 135,000 workers, more than a fifth of that segment’s current workforce, are expected to retire by 2035.
- Construction employs about 1.6 million people in Canada, roughly 1 in 13 workers, with 1.25 million working directly in the trades.
- Administrative work, scheduling, invoicing, permit tracking, and coordination, doesn’t require a trade license and is one of the most delegable parts of a contracting business.
- Shifting that work off-site doesn’t solve the national shortage, but it stretches the skilled hours a contractor already has, which matters when hiring another tradesperson isn’t realistic.
- The technical judgment, licensed work, and site decisions that actually require a trade credential stay exactly where they are.
How Big Is Canada’s Skilled Trades Shortage, Really?
The numbers behind the shortage are larger than most contractors assume, and they explain why competing for skilled labour has gotten harder every year rather than easing off.
- 306,200 workers projected to be needed industry-wide by 2034
- Up to 34,300 workers short even with roughly 272,000 new entrants under 30 expected to join the trades
- 135,000 residential-sector workers, over a fifth of that workforce, expected to retire by 2035
- 1.6 million people employed in construction across Canada, about 1 in every 13 workers
A gap that size doesn’t close through hiring alone, especially for smaller contractors competing against larger firms for the same shrinking pool of licensed tradespeople. The more realistic lever most contractors have is making better use of the skilled hours they’ve already got.
Newcomers already make up roughly 20 percent of the construction workforce, and that share is likely to keep growing as the industry looks beyond its traditional hiring pool to close the gap. That’s a positive trend for the labour supply, but it also adds onboarding paperwork, scheduling coordination, and communication tasks that pull further on a foreman’s or office manager’s time, exactly the kind of work that doesn’t need a trade license to get done well.
Where Skilled-Trade Hours Actually Go
Not every hour on a contractor’s payroll needs a trade license behind it, but it’s easy to lose track of how much licensed time gets absorbed by work that doesn’t.
| Skilled Trade Work | Back-Office Admin Work | |
| Who can do it | Only a licensed or qualified tradesperson | Any trained administrative support, on-site or remote |
| Example tasks | Installations, diagnostics, site judgment calls, technical client advice | Invoicing, scheduling, permit tracking, supplier follow-up |
| Cost if a tradesperson does it anyway | None, it’s the right use of their time | Full trade-labour cost spent on work that never needed a license |
| Cost if it’s delayed | Work stalls; quality or safety risk | Missed invoices, scheduling conflicts, slower cash flow |
| Best owner given the shortage | Keep in-house, it’s the scarce resource | Shift off-site, since it’s the part that can scale |
Framed this way, the decision isn’t really about whether admin work matters. It’s about which parts of the day are actually irreplaceable, and which parts just need to get done by someone qualified to do them.
10 Back-Office Tasks Contractors Can Shift Off a Tradesperson’s Plate
Most of what fills a tradesperson’s evening or a foreman’s inbox falls into back-office construction admin support, not licensed trade work:
- Scheduling and dispatching crews across active jobs
- Preparing and sending invoices, then following up on anything overdue
- Following up on outstanding quotes so leads don’t go cold
- Ordering and tracking materials with suppliers
- Tracking permit applications and renewal dates
- Coordinating subcontractor scheduling across a job
- Preparing payroll administration for a bookkeeper or accountant to review and finalize
- Sending appointment reminders and routine customer updates
- Filing job documentation, photos, warranties, and closeout paperwork
- Following up for reviews and referrals after a job wraps
Several of these overlap directly with the remote project administration support a construction VA already provides, and the quoting and follow-up tasks connect naturally to the kind of estimating capacity for Canadian contractors covered in a related guide, since both are about protecting a tradesperson’s billable hours from non-billable work.
What Stays With the Licensed Tradesperson
None of this shifts technical responsibility anywhere. Diagnosing a problem on-site, making a licensed installation, and giving a client technical advice about their project stay exactly where they belong, with the tradesperson who holds the credential and carries the liability for that call.
What moves is everything around those decisions: the scheduling that gets a tradesperson to the right job on time, the invoice that gets them paid for it, and the paperwork trail that protects the business if a job is ever questioned later.
Drawing that line clearly also protects the contractor. A VA handling admin work should never be put in a position of making a call that requires a license or years of hands-on trade experience, and a contractor who keeps that boundary explicit avoids the kind of confusion that causes real problems on a job site.
Making the Shift Without Disrupting Crews
Most contractors don’t hand off ten tasks at once, and they shouldn’t. A gradual shift protects the crew’s routines while still freeing up real time.
- Start with the single most repetitive task, usually scheduling or invoicing, and hand it off first
- Track how many hours that frees up over a few weeks before adding a second task
- Add tasks that already sit close together, like quote follow-up and customer communication, so handoffs don’t fragment across multiple people
Keeping this connected to construction finance back-office support from the start makes it easier to see where delegated admin work and the books actually meet, rather than running two separate systems that never reconcile cleanly.
Things to Know
- BuildForce Canada projects a possible shortfall of up to 34,300 construction workers by 2034, even with strong new-entrant recruitment.
- 135,000 residential-sector workers, over a fifth of that workforce, are expected to retire by 2035.
- Administrative tasks like scheduling, invoicing, and permit tracking don’t require a trade license and are highly delegable.
- Shifting admin work off-site stretches existing skilled labour rather than replacing the need for tradespeople.
- Technical judgment, licensed work, and site decisions stay with the tradesperson who holds the credential.
- A gradual, one-or-two-task rollout tends to work better than shifting everything to a VA at once.
Frequently Asked Questions
How severe is Canada’s skilled trades shortage right now?
BuildForce Canada projects the industry will need to recruit roughly 306,200 workers by 2034, and even with nearly 272,000 new entrants under 30 expected to join the trades, the sector could still be short by as many as 34,300 workers.
Retirements are a big driver of that gap. In the residential sector alone, roughly 135,000 workers, more than a fifth of that segment’s current workforce, are expected to retire by 2035.
How does delegating admin work help with a labour shortage?
Every hour a licensed tradesperson spends on invoicing, scheduling, or paperwork is an hour that isn’t billable and doesn’t require their trade license, so shifting that work off-site effectively expands a contractor’s usable skilled-labour capacity without hiring another tradesperson.
It doesn’t fix the national shortage on its own, but it stretches the skilled hours a contractor already has further.
What back-office tasks can a virtual assistant realistically take on?
Scheduling, invoicing, supplier follow-up, permit tracking, subcontractor coordination, and customer communication are all tasks a construction VA regularly handles for contractors.
None of it requires a trade license or hands-on site judgment, which is exactly why it’s the first place most contractors look when they want to free up skilled time.
Does delegating admin work replace the need for skilled tradespeople?
No. Delegating administrative work doesn’t replace a single hour of licensed trade work, it just removes non-trade tasks from a tradesperson’s day so more of their time goes toward work only they can do.
Technical judgment, licensed work, and site decisions stay exactly where they are.
Is this shift worth it for a small contracting business?
Smaller contractors often feel the shortage hardest, since there’s rarely a spare person on staff to absorb admin work when the business gets busy.
Starting with one or two of the most repetitive, highest-volume tasks, like scheduling or invoicing, is usually enough to notice the difference before expanding further.
Stop Spending Scarce Skilled Hours on Paperwork
A shortage this size isn’t solved by working harder inside the same number of hours, it’s solved by making sure every skilled hour goes toward work that actually needs that skill. Reach out to see which back-office tasks could come off your crew’s plate first, and how much billable time that could realistically free up this quarter.